Marble & granite sq ft calculator
Square feet = height × width in inches ÷ 144 × pieces; multiply by the rate, then add wastage, molding, fitting and GST for the quotation total.
Quotation
- Total area
- 84 sq ft
- Material
- ₹9,360.00
- Wastage (5%)
- ₹468.00
- Molding
- ₹900.00
- Fitting
- ₹1,000.00
- Subtotal
- ₹11,728.00
- GST (18%)
- ₹2,111.04
- Grand total
- ₹13,839.04
Sq ft = height × width ÷ 144 × pieces
How do you calculate square feet for marble and granite?
Multiply the height by the width of a piece in inches and divide by 144 to get its square feet, then multiply by the number of pieces. Multiply the square feet by the rate per sq ft for the material amount. Add any wastage percentage, molding (running feet × rate) and the fitting charge to get the subtotal, then add GST at the rate on your invoice for the grand total.
- Sq ft per piece = height (in) × width (in) ÷ 144
- In feet: height × width. In cm: ÷ 929.0304. In mm: ÷ 92,903.04
- Line amount = sq ft per piece × pieces × rate per sq ft
- Subtotal = material + wastage + molding + fitting
- Grand total = subtotal + subtotal × GST% ÷ 100
Worked example
A customer wants ten pieces of 24 × 36 inch marble at ₹120 per sq ft and four pieces of 18 × 48 inch at ₹90 per sq ft, with 5% wastage, 20 running feet of molding at ₹45, a ₹1,000 fitting charge and 18% GST. These are the numbers the calculator above starts with.
| Size | Sq ft each | Pieces | Sq ft | Rate | Amount |
|---|---|---|---|---|---|
| 24 × 36 in | 864 ÷ 144 = 6 | 10 | 60 | ₹120 | ₹7,200.00 |
| 18 × 48 in | 864 ÷ 144 = 6 | 4 | 24 | ₹90 | ₹2,160.00 |
- Total area
- 84 sq ft
- Material
- ₹9,360.00
- Wastage 5%
- ₹468.00
- Molding 20 × ₹45
- ₹900.00
- Fitting
- ₹1,000.00
- Subtotal
- ₹11,728.00
- GST 18%
- ₹2,111.04
- Grand total
- ₹13,839.04
Common questions
How many square feet is a 24 × 36 inch marble piece?
6 sq ft. 24 × 36 = 864 square inches, and 864 ÷ 144 = 6. Ten such pieces are 60 sq ft.
Why do you divide by 144?
One square foot is 12 inches by 12 inches, which is 144 square inches. Height × width in inches gives square inches, so dividing by 144 turns it into square feet.
How do I work out sq ft from mm or cm sizes?
Choose millimetres or centimetres as the unit and the calculator converts for you. By hand, divide each side in mm by 304.8 (or in cm by 30.48) to get feet, then multiply height × width.
Which GST rate should I choose?
Use the rate printed on your own tax invoice. GST on stone, tiles and fitting work depends on the item's HSN or service code and has changed over time, so this calculator does not pick a rate for you. Check with your accountant if you are not sure.
How is molding charged?
Molding (edge finishing) is charged per running foot: measure the length of every edge that gets molding, add it up and multiply by your molding rate. 20 running ft at ₹45 is ₹900.
Should I add wastage to the customer's quotation?
Some traders add a wastage percentage for cutting loss and breakage; others build it into the rate per sq ft. If you already price it into the rate, leave wastage at 0 so you don't charge for it twice.
Make these quotations in MCalc
MCalc makes sq ft quotations and GST bills for marble, granite and tile traders, and tracks slabs, dues and payments. Works on phone and computer, in English and Gujarati. You enter each piece as height × width in inches and the number of pieces, and MCalc works out the sq ft and amount for every line and adds molding, sand fitting and GST. 30-day free trial, no card needed. Each new sign-up is approved by DCode Software first.
Last checked