How to Calculate Sq Ft for Marble and Granite Billing
To get square feet from inches, multiply height × width in inches, divide by 144, then multiply by the number of pieces. A 42 × 12 inch step is 3.5 sq ft, so 12 steps are 42 sq ft. Molding is charged by running feet, fitting by sq ft, and GST goes on the total.
Why divide by 144 and not by 12?
One square foot is 12 inches × 12 inches, which is 144 square inches. So when you measure a piece in inches, height × width gives square inches, and you divide by 144 to get square feet.
Dividing by 12 is the most common slip on handwritten bills. It makes the area 12 times too big. On a busy counter, nobody notices until the customer checks the bill at home.
If the site measurement is written in feet and inches, such as 8'0" × 2'1", change both sides to inches first: 8'0" is 96 inches and 2'1" is 25 inches. Mixing feet on one side and inches on the other is the second most common slip.
How do you work out sq ft for each line of a quotation?
For each line: height in inches × width in inches × number of pieces, divided by 144. Round each line to two decimals and add the lines. Here is a real-sized job: a granite kitchen platform in two parts and a staircase with 12 steps.
| Item | H × W (inches) | Pieces | Working | Sq ft |
|---|---|---|---|---|
| Platform, long side | 96 × 25 | 1 | 2,400 ÷ 144 | 16.67 |
| Platform, short side | 60 × 25 | 1 | 1,500 ÷ 144 | 10.42 |
| Steps (treads) | 42 × 12 | 12 | 504 × 12 ÷ 144 | 42.00 |
| Risers | 42 × 6 | 12 | 252 × 12 ÷ 144 | 21.00 |
| Total | 90.09 | |||
If you want to check a size quickly, our free marble and granite sq ft calculator does the same working for any number of lines.
Where do wastage, molding and fitting go on the bill?
Give each one its own line. A single “all-in” rate is quicker to write, but the customer cannot check it, and you cannot see later which part of the job made or lost money.
- Wastage is extra material lost in cutting. Show it as a percentage of the sq ft. In our example, 5% of 90.09 sq ft is 4.50 sq ft.
- Molding (edge finishing) is charged by running feet (rft), not sq ft. Add the length of every finished edge in inches and divide by 12. The platform's front edges are 96 + 60 = 156 inches, or 13 rft. Each step's front edge is 42 inches, so 12 steps are 504 inches, or 42 rft. Total: 55 rft.
- Sand fitting (laying) is usually charged per sq ft of stone fitted, so use the 90.09 sq ft, not the sq ft with wastage.
What does the full bill look like with GST?
Here is the same job priced out. The rates are examples only: granite at ₹180 per sq ft, molding at ₹45 per rft and fitting at ₹30 per sq ft. The customer is in the same state as the shop, so GST is split into CGST and SGST.
| Line | Quantity | Rate (₹) | Amount (₹) |
|---|---|---|---|
| Granite | 90.09 sq ft | 180 | 16,216.20 |
| Wastage (5%) | 4.50 sq ft | 180 | 810.00 |
| Molding | 55 rft | 45 | 2,475.00 |
| Sand fitting | 90.09 sq ft | 30 | 2,702.70 |
| Taxable value | 22,203.90 | ||
| CGST @ 9% | example rate | 1,998.35 | |
| SGST @ 9% | example rate | 1,998.35 | |
| Round off | −0.60 | ||
| Bill total | 26,200.00 | ||
Should you round each line or only the total?
Round each line to two decimals, print the sq ft on every line, and use the same rule on every bill. The difference is small but customers do check it.
In our example, the exact total is 90.0833 sq ft, which at ₹180 is ₹16,215.00. Rounding each line first gives 90.09 sq ft and ₹16,216.20, a difference of ₹1.20. Neither is wrong. What causes arguments is a bill that rounds one way today and another way next week, or a total with no sq ft shown, so the customer cannot repeat your working.
Which mistakes cost stone traders the most?
- Dividing square inches by 12 instead of 144.
- Forgetting to multiply by the number of pieces on step and riser lines.
- Charging molding per sq ft instead of per running foot, or leaving it off.
- Taking fitting on the sq ft including wastage, so the customer pays fitting on stone that was never laid.
- Typing the quotation again by hand when making the tax invoice, which brings new typing errors.
The last one is easy to avoid with billing software that turns the approved quotation into the invoice. In MCalc, the approved quotation becomes the tax invoice, so nothing is typed twice. Its cutting plan shows how a quotation's pieces fit on the slabs you already have, with the waste and yield. That gives you a real wastage figure instead of a guessed 5%.
Frequently asked questions
How many sq ft is a granite slab of 10 feet by 2 feet?
10 × 2 = 20 sq ft. If the size is in inches, 120 × 24 = 2,880 square inches, and 2,880 ÷ 144 = 20 sq ft. Always convert both sides to inches first if the size is written in feet and inches, such as 8'4" × 2'1".
How do I calculate running feet for molding?
Add the length of every edge that gets molding, in inches, and divide by 12. A kitchen platform with a 96 inch and a 60 inch front edge has 156 inches of molding, which is 13 running feet. Multiply by your molding rate per running foot.
Should wastage be charged to the customer?
That is your decision, but write it on the quotation as its own line, for example 5% of the sq ft. Customers argue less about a visible wastage line than about a total that is higher than their own height × width maths.
What GST rate applies to marble and granite?
It depends on the item's HSN code, for example raw blocks and finished slabs can fall under different entries, and rates can change. Check the current rate for each item with your CA before setting it in your billing software.
Make sq ft quotations without a calculator
MCalc takes each piece as height × width in inches, works out sq ft, molding, sand fitting and GST, and turns the approved quotation into a tax invoice. It works on phone and computer, in English and Gujarati. The 30-day free trial needs no card; each sign-up is approved by DCode Software first.